An energy bill looks like a wall of numbers. But the figures that actually tell you whether you are paying a fair price are only a handful — and one of them gives the answer in seconds.
Almost everyone pays the energy bill and almost nobody reads it to the end. That's fair enough: between unit rates, standing charges and estimated figures it can feel designed to put you off. Yet to work out whether you're paying a sensible price, you don't need to read all of it. A couple of lines, the same ones on every British gas and electricity bill, do most of the job.
Here's what they are, what they mean, and how to use them to sense-check your tariff — without switching anything unless it's actually worth it.
The unit rate is what you pay for each unit of energy you use — pence per kilowatt-hour (kWh) for electricity and gas. It's the part of the bill that moves with your usage, and the number to compare against other tariffs. Alongside it sits the standing charge, a fixed daily amount you pay whatever you use.
The two charges behind almost every bill
Strip away the branding and a domestic energy bill comes down to two things for each fuel:
- The unit rate — pence per kWh, multiplied by how much you used. Use more, pay more.
- The standing charge — a fixed daily charge (pence per day) that covers the cost of keeping you connected to the network, whether you use any energy or not.
So two homes on the same tariff can get very different totals purely because one used more energy — and two homes using the same amount can differ because they're on different unit rates or standing charges. That's why comparing the total of last month's bill against a friend's tells you almost nothing. The unit rate and standing charge are what actually compare.
The figures above are made up to show the shape of the sum, not a quote — your unit rate, standing charge and usage will differ. Domestic energy also carries VAT at a reduced rate of 5%.
The price cap sets a ceiling, not your bill
You'll have heard about the energy price cap. It's set by the regulator, Ofgem, and it limits the unit rates and standing charges a supplier can charge on a standard variable tariff. It's often reported as a single yearly figure, but that figure is for a household with typical usage — it is not a maximum on your bill. If you use more than the typical household, you'll pay more than the headline number; use less and you'll pay less.
The cap applies to standard variable tariffs. If you're on a fixed deal, your unit rate and standing charge are set by that contract instead, and the cap doesn't directly apply. Being on a fixed tariff isn't automatically cheaper or dearer — it depends on the rates and how prices move.
Fixed or variable?
A tariff is usually one of two kinds:
- Fixed — the unit rate and standing charge are locked for a set term (say 12 months). You get certainty; in return, you don't benefit if market prices fall during the term, and there may be an exit fee if you leave early.
- Variable — the rates can change (on a standard variable tariff, within the cap). You benefit when prices fall but carry the risk when they rise.
Neither is "right" in the abstract. What matters is the rates on offer today and how comfortable you are with the risk.
How to tell in a few minutes if you're overpaying
No spreadsheet needed:
- Find your unit rate (p/kWh) and standing charge (p/day) for each fuel — they're printed on the bill, often near a tariff summary.
- Note your annual usage in kWh, also on the bill. If you only have a monthly figure, that's fine for a rough check.
- Compare your rates with the deals available now. An impartial starting point is Ofgem, which accredits price-comparison sites, and MoneyHelper, the government-backed guidance service.
If your rates are within a whisker of the best available, switching often isn't worth the faff. If the gap is wide and consistent, it may be worth a look. Either way it's an estimate, not a promise — the result depends on your real usage and the deals at the time.
When the problem isn't the tariff
Sometimes a bill is high because of usage, not price: an old electric immersion heater, heating left high, or an estimated bill that's drifted away from reality. In those cases switching supplier moves the needle very little; giving an up-to-date meter reading, or dealing with the usage, does more. Reading the bill helps you tell which problem you've actually got.
Compare the unit rate and the standing charge — not last month's total.
In short
An energy bill is more off-putting than it is complicated. Find the unit rate and standing charge, note your annual usage, and sense-check them against the deals around — using Ofgem and MoneyHelper as neutral starting points. It's a ten-minute habit that's worth repeating whenever a fixed deal ends. For more on the cap itself see what the energy price cap does and doesn't do, and for another household saving, whether switching broadband or mobile is worth it.
Sources
- Ofgem — Energy advice for households — unit rates, standing charges, the price cap and accredited comparison
- MoneyHelper — Saving on energy — government-backed guidance on reading bills and switching
- Citizens Advice — Energy supply — help with bills, tariffs and meter readings
This is general information and sponsored content from FREMUR CONSEIL SAS. It is not financial, tax or legal advice, and not a recommendation to buy any product or service. Figures are averages or illustrative examples, correct as at the date shown, and your own situation may differ; for your own money, pensions or tax, use the official bodies and sources cited above, such as GOV.UK.
